Ingrown Toenail Corrector Sticker Nail Correction Sticker Ingrown Toenail Corrector Thick Correction Foot Tool

Product Description :

Specification: Item Type: Nail Correction Sticker Color: Transparent Size: Approx.
4 x 26mm / 0.
16 x 1.
02in Thickness: Approx.
0.
3mm / 0.
01in Tensile Force: 3N Quantity: 120pcs Instructions: 1.
Clean the inside and outside of the toenails, make the inside and outside of the nail surface free of foreign matter and dry.
Then cut the orthopedic nail tape to the appropriate size according to the width of the toenail.
(If the position of the edge of the toenail is difficult to stick, there can be a distance of about 1-2 mm between the orthodontic sticker and the edge of the toenail) 2.
Polish one side of the orthopedic nail with a sand strip or a nail polisher.
(Make the entire surface of the orthopedic sticker relatively rough and easy to absorb glue, clean it with alcohol cotton after polishing) 3.
Polish the surface of the toenail with a sanding strip or a sander to make the surface of the toenail smooth and without unevenness 4.
Clean the nail surface with alcohol disinfectant cotton so that there is no dust and debris on the surface of the nail.
Air the toenails for 5 minutes or dry them with a hair dryer.
5.
Apply glue on one end of the patch and stick it horizontally on the side of the toenail.
Do not leave a gap at the front end.
You can use a tool or a finger/sleeve to press it with your hand for about 30 seconds to fix it and release it.
Wait 1-2 minutes before proceeding.
One step (for better bonding).
6.
Apply glue on the raised end, slightly more, the curing time of the glue is about 10 seconds, the less you apply, the faster it will dry.
Prevent it from doing it without posting Package List: 120 x Nail Correction Sticker 1 x Storage Box

Product Details :